ISSUE: GRILL WILL NOT IGNITE


SOLUTION: CHECK THE FOLLOWING


·    Verify there is power at the electrical outlet where the grill is plugged in.

·    If the Power Cord is connected to a GFI (Ground Fault Interrupter) outlet check a  and

Reset if necessary.

·    Turn the Temperature Dial to OFF.

·    Turn the Temperature Dial to SMOKE.

A. If the LCD Screen lights up, then perform the additional steps.

B.   If the LCD Screen noes not light up., there is no power at the grill.

·    Turn the Temperature Dial to OFF. Open the Lid, remove all food, the Cooking Grates,

Grease Tray, and Heat Diffuser.

·    Remove all unburned Pellets and ash from the Fire Pot.

DO NOT TOUCH THE FIRE ROD. This item gets extremely HOT and can cause burns.

·    With the items removed from the Grill, turn the Temperature Dial to SMOKE.

A.   Visually confirm the Fire Rod is getting HOT and turning Red.

 DO NOT TOUCH THE FIRE ROD. This item gets extremely HOT and can cause burns.

              B.   Visually confirm Pellets are dropping into the Fire Pot from the Auger.